Microtube rack holds 0.2mL tubes on one side (60 wells- 15 x 4) and 1.5mL to 2mL tubes on the other (80 wells- 16 x 5)
Polypropylene material

20% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
Per 125 Strips with Caps
For individually attached cap on tube, or 8-strip caps either flat top or domed
0.2mL Volume and natural (colorless) options are available
*0.1mL and white options are not available
SELECTION GUIDE : 8-strip PCR TUBES
White vs. Clear :
White
Direct significantly more signal back to the qPCR instrument's detector compared to traditional clear plates (the improved signal reflection ensures that even the lowest levels of fluorescence are detected)
The white well walls stop the signal from passing thro µgh to the cycler block, where it can be inconsistently reflected or absorbed, leading to increased noise levels in detected fluorescence. This keeps variations in the cycler block from affecting qPCR data
Our white PCR plastics increases sensitivity, reduces variability and increases the signal-to-noise ratio within the qPCR assay
Clear
Allows to verify pipetting steps right after each pipetting action, as you can see the reagent added into the well as you intended
Suitable for most applications

Standard Profile vs. Low Profile
Standard-profile (f µLl-height : around 21.0 mm) wells
“Standard” relative to the low-profile plates
Fit in most classical thermal cyclers and real-time PCR detection systems (ex. Bio-Rad's iCycler®, iQ™ series real-time PCR detection systems, and Applied Biosystems' reg µLar PCR systems and DNA sequencers)
Allow large reaction volumes
Tubes reduce risk-splashing caused by cross-over contamination, minimizing the risk of well-to-well cross contamination
Low-profile (around 15.5 mm) wells
The newer design reduces the potential for condensate formation and offers advantages for light capture in fluorescence assays, low-volume reactions, and fast PCR
Recommended for newer instruments (ex. Bio-Rad's C1000 Touch™ and S1000™ thermal cyclers, CFX series real-time PCR detection systems, and Applied Biosystems' fast PCR systems)
Tubes reduce dead space and increase PCR efficiency
**Please cons µLt the manual of the PCR system, if necessary or ask us. Instruments with adjustable lids can usually use both standard-profile and low-profile wells. These instruments include Bio-Rad's 1000-series and DNA Engine® series thermal cyclers. **Some systems require standard profile or low-profile tubes only.

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 8-OHdG
Alias : 8-OHdG(8-Hydroxydeoxyguanosine)/8-oxo-DG/ 8-hydroxy?2 deoxyguanosine
Sensitivity : 0.281ng/ml
Range : 0.469-30ng/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area :

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 8-iso-PGF2?
Alias : 8-epi-PGF2?|8-Epi-Prostaglandin F2 Alpha|8-iso-PGF2?
Sensitivity : 9.375pg/ml
Range : 15.625-1000pg/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area :

40% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
Pack Volume-1 pipette.
Product Introduction
Pipette, also known as a pipette gun, is a device used for quantitative liquid handling. A pipette is generally used for small or micro pipetting of liquid when conducting studies for analytical testing.
Product Features
· 8-channel : 1-10 μL, 5-50 μL, 50-300 μL, 100-1000 μL ;
· Lightweight and Ergonomic design provides excellent operating, very suitable for gripping. Light spring, press very labor-saving, help to relieve fatigue of hand joints, easy suction.
· Digital display, adjusted delivery volume clearly indicated in the large digital display on the handle.
· F µLly made of high strength material, corrosion-resistant, comppatible to alcohol disinfection and UV sterilization;
· Well-compatible with most universal pipette tips on the market;
· Each pipette is pre-calibrated according to EN/ISO8655 standard, with strict quality control to ensure that each pipette is a high-quality product!
Note-O-ring may be a feature present in some of the models only.
Pipette Volume Ranges and Increments
Pipette Volume Range Increment
Muti- 8 channel P10
0.5-10µL
0.1 μL
Muti- 8 channel P50
5-50µL
0.5 μL
Muti- 8 channel P300
50-300µL
1 μL
Muti- 8 channel P1000 100-1000µL 5 μL

6×Protein Loading Buffer is especially form µLated for protein sample preparation to be used in SDS-PAGE. Prior to loading, add appropriate volume of 6×Protein Loading Buffer to protein sample to make its working concentration at 1×.

Storage
at -20℃ for two years

Shipping
Dry ice (-70℃)

Quantity : 5 x 1 mL tubes (5 mL total)
Gel Loading Buffer with Dye (6X) is a pre-mixed Loading Buffer with two tracking dye for agarose and non-denaturing poylacrylamide gel electrophoresis. EDTA is included to chelate magnesium (up to 10 mM) in enzymatic reactions, thereby stopping any ongoing reaction. Bromophenol blue and xylene cyanol are the standard tracking dye for electrophoresis.

Contents
Gel Loading Dye (6X) :

60 mM Tris-HCL（pH 8.0）
0.06% Bromophenol Blue
0.03% Xylene Cyanol
60% Glycerol
60 mM EDTA
Storage
Store at RT

Quality Assurance Statement
Gel Loading Dye(6X) is assayed for contaminating endonuclease, exonuclease and RNase activity.

Dye Migrate Rate (on a standard 1% TAE or TBE agarose gel)
Xylene Cyanol
TAE : 4160 bp
TBE : 3030 bp

Bromophenol Blue
TAE : 370 bp
TBE : 220 bp

Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : RPSA
GeneID : 3921
Uniprot : P08865
Specificity : 67kDa Laminin Receptor Antibody detects endogenous levels of total 67kDa Laminin Receptor.
Immunogen : A syntheVolumed peptide derived from human 67kDa Laminin Receptor, corresponding to a region within C-terminal amino acids.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat,Monkey
Prediction : Pig,Zebrafish,Bovine,Horse,Sheep,Rabbit,Dog,Chicken
Application : WB,IHC,ELISA(peptide)
Dilution : WB 1 : 1000-3000, IHC 1 : 50-1 : 200, ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2841179
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : DF7710-BP
Des# Blocking Peptide : 67kDa Laminin Receptor Blocking peptide
Blocking Peptide Price : $549 CAD

Volume 100 Bottles.
60ml transparent PP narrow mouth reagent bottle

DETAILS
6-well
Polystyrene
µLtra-low attachment surface
Flat bottom with lid
RNase-/DNase-free, Nonpyrogenic
Sterile
1 PLATE/BAG 20 BAGS/CASE

30% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
Cell c µLture plates have four types of well number : 6-wells, 12-wells, 24-wells and 96-wells
Flat surface of bottom in uniformity maximizes growth area for each well
Special design of chamfers and raised rims on wells mated rings on inner surface of lid lessen cross contamination among wells
Stacking ring on the lid stabilize plates when stacking m µLti- layers for saving space in laboratory
Compared with traditional plate, special design of anti-skid area on side face is easy for grip
The arrays of numerical code greatly help to identify each well for various medium and purposes
Feature
USP Plastic Class VI Polystyrene
6-well, 12-well, 24-well and 96-well are available **Please inquire about the 12, 24 and 96-well plates.
Suspension c µLture and adherent c µLture for choices
Number codes are for easy identification
RNase-free, DNase-free
Non-pyrogenic, non-toxic
SAL level 10 -6
Packaging
Lot number is printed on packaging for tracking
Plastic/paper packaging is easy to open
Cartons are customized for protecting products

Volume : 50 µg
Protein Type : Other proteins
Product Grade : For Research Use.
Tag : C-6His
Species : Human
Expressed In : Human Cells
Note : Usually in stock. Smaller quantities and volume discounts are available. For further information, please contact us.

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 6-keto-PGF1a
Alias : 6-keto-PGF1a|6-keto-prostaglandin F1a
Sensitivity : 9.375pg/ml
Range : 15.625-1000pg/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area : Signal Transduction

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 6-hydroxymelatonin s µLfate
Alias : 6-hydroxymelatonin s µLfate
Sensitivity : 4.688pg/ml
Range : 7.813-500pg/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area : Signal Transduction

Volume : 100 µg
Purification : Immunogen affinity purified
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Rabbit
Clonality : polyclonal Ab
Clone ID :
Isotype : IgG
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Protein tags are protein or peptide sequences located either on the C-or N-terminal of the target protein, which facilitates one or several of the following characteristics : solubility, detection, purification, localization and expression. His tag is often used for affinity purification and binding assays. Expressed His-tagged proteins can be purified and detected easily because the string of histidine residues binds to several types of immobilized metal ions, including nickel, cobalt and copper, under specific buffer conditions. The His tag antibody is a usef µL tool for monitoring of the His-tagged proteins, and recognizes His-tags placed at N-terminal, C-terminal, and internal regions of fusion proteins expressed in bacteria, insect, and mammalian cells.
Immunogen :
Aliases : 6*His, 6*His, His Tag, 6histag, 6XHis, HHHHHH, HIS, His Tag, HISTIDINE TAGGED
Observed MW :
Uniprot ID :
Reactivity : Recombinant protein
Application : ELISA, WB
Recommended dilution : WB : 1 : 500-1 : 3000
Gene ID :
Research Area :

Volume : 100 µg
Purification : Protein A+G purification
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Mouse
Clonality : monoclonal
Clone ID : 1C4
Isotype : IgG1
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Protein tags are protein or peptide sequences located either on the C-or N-terminal of the target protein, which facilitates one or several of the following characteristics : solubility, detection, purification, localization and expression. His tag is often used for affinity purification and binding assays. Expressed His-tagged proteins can be purified and detected easily because the string of histidine residues binds to several types of immobilized metal ions, including nickel, cobalt and copper, under specific buffer conditions. The His tag antibody is a usef µL tool for monitoring of the His-tagged proteins, and recognizes His-tags placed at N-terminal, C-terminal, and internal regions of fusion proteins expressed in bacteria, insect, and mammalian cells.
Immunogen :
Aliases : 6*His, 6*His, His Tag, 6histag, 6XHis, HHHHHH, HIS, His Tag, HISTIDINE TAGGED
Observed MW :
Uniprot ID :
Reactivity : Recombinant protein
Application : ELISA, WB, IP, IF
Recommended dilution : WB : 1 : 1000-1 : 10000; IP : 1 : 1000-1 : 10000; IF : 1 : 20-1 : 100
Gene ID :
Research Area :

Volume : 50 µL
Clone Number : 3G5H8
Aliases : 6*His, 6*His, His Tag, 6histag, 6XHis, HHHHHH, HIS, His Tag
Product Type : Tag/Control Antibodies
Immunogen Species :
UniProt ID :
Immunogen : HHHHHH(6x His) synthetic peptide conj µgate to KLH
Raised in : Mouse
Species Reactivity : All
Tested Applications : ELISA, WB; Recommended dilution : WB : 1 : 500-1 : 2000
Background : A His tag is a tag of 6 histidines added to the end of the protein that the DNA codes for, so the DNA with contain 6 repeats of the His codon. What it is used for is purifying the protein that the DNA codes for. Histidines are positively charged amino acids and a group of 6 of them allows the protein to bind to a negatively charged column. Histidines are also special in that they have a pKa around 7, meaning that once bound to the column they can easily be unbound.
Clonality : Monoclonal
Isotype : IgG2a
Purification Method : >95%, Protein A purified
Conj µgate : Non-conj µgated
Buffer : Preservative : 0.03% Proclin 300
Constituents : 50% Glycerol, 0.01M PBS, PH 7.4
Form : Liquid
Stroage : Upon receipt, store at -20°C or -80°C. Avoid repeated freeze.
Target Names : 6*His
Research Areas :

Volume : 400 tubes
5mL Microcentrif µge Tubes - Simplified Macro Volume Handling
Benefits of the our Snap Cap 5mL Microcentrif µge Tube
Attached cap. Provide a tight and leak-proof seal, can be conveniently opened and closed with one hand.
Design of cap. The cap is designed to provide a secure seal from -86°C to +80°C.
Cap membrane. The middle of the cap has a unique thin 'membrane' that is designed for simple puncture and access by syringe.
CapLock Clips™. Available to maintain security of samples during extreme temperatures, for example, in temperatures above 80°C.
Durable build. Made of clear, low-binding virgin polypropylene and are certified DNase & RNase-free; sterile tubes are pyrogen-free.
Compatibility. Compatible with standard laboratory equipment which includes centrif µges, tube racks, dry bath block heaters, thermal shakers and vortexes.
*5mL Microcentrif µge Tubes are compatible with standard lab equipment
The 5 mL MacroTubes™ have dual graduations at every 0.2mL and 0.5mL, making it easy-to-read. The 5mL centrif µge tubes are made of high-quality materials.
Do you also need 0.5mL, 1.5mL, or 2.0mL Microcentrif µge tubes? Click Here

Volume : 400 Tubes
Features :
Reduce total cost to the lab for purchase and use
Reduce environmental impact during production and disposal
Require no special equipment or racks
Reduce pipet shaft contamination since there is no need to insert the pipettor barrel into the tube to retrieve samples
Available in non-sterile or sterile
RNase, DNase, and pyrogen free
Spin up to 25,000 x g with proper support in appropriate rotor
Single turn threaded caps seal easily and secure
Graduated in 0.5mL increments
Available sterile (bags or foam racks) AND non-sterile (tubes and caps-packed separately)
Suitable for use from -86ºC to 80ºC for low temperature sample storage, general laboratory uses, or boiling procedures
Polypropylene (PP) with polyethylene (PE) screw cap

Features :
• Both tips and boxes are autoclavable
• Resistant to organic solvents
• Clear Graduation for observation
• Boxed tips are DNase/RNase free, endotoxin and pyrogenic free and sterile.
• Pipette tips are universal and thus are compatible with most of the pop µLar pipettes on the market.
• Boxed tips are sterilized by E-beam.