Skip to Content
5 pipette Flat panel Pipette Stand
Pack Volume-1 stand.
Product Introduction :
1. The pipettor stand is made of ABS material which has the characteristic of acid and alkali resistance, chemical corrosion resistance;
2. High elasticity and strength, and durable;
3. Integrated molding, firm interface, smooth surface, much safer;
4. Unique hollow groove design, stable and safe for pipettor standing;
5. M µLti-color options-more colors than show are available.


Product Feature :
Material : ABS;
Dimensions (CM) : H 26.2 * W 25 * D 14.7;
Compatibility : single channel, 8-channel and 12-channel pipette.

Storage and Transportation
Storage and transportation in room temperature.
0.01 0.01 USD
5 Hydroxytryptamine (5HT) ELISA Kit
Species Reactivity : General
UniProt : N/A
Abbreviation : 5HT
Alternative Names : N/A
Application : ELISA
Range : 3.125-200 ng/mL
Sensitivity : 1 ng/mL
Intra-AssayCV : ?4.3%
Inter-AssayCV : ?7.6%
Recovery : 0.96
Sample Type : Serum, Plasma, Other biological fluids
Detection Method : Sandwich
Analysis Method?? : Quantitive
Test principle : This assay employs a two-site sandwich ELISA to quantitate 5HT in samples. An antibody specific for 5HT has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and any5HT present is bound by the immobilized antibody. After removing any unbound substances, a biotin-conj µgated antibody specific for 5HT is added to the wells. After washing, Streptavidin conj µgated Horseradish Peroxidase (HRP) is added to the wells. Following a wash to remove any unbound avidin-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of 5HT bound in the initial step. The color development is stopped and the intensity of the color is measured.
Product Overview : Serotonin also called 5-hydroxytryptamine, is primarily found in the gastrointestinal (GI) tract and central nervous system (CNS) of animals. Approximately 80 percent of the human body's total serotonin is located in the enterochromaffin cells in the gut, where it is used to reg µLate intestinal movements. The remainder is syntheVolumed in serotonergic neurons in the CNS where it has various functions, including the reg µLation of mood, appetite, sleep, muscle contraction, and some cognitive functions including memory and learning; and in blood platelets where it helps to reg µLate hemostasis and blood clotting. In addition to animals, serotonin is also found in fungi and plants. 5-hydroxytryptamine(5-HT) is an important neurotransmitter made by neurons in the central nervous system. These functions are mediated by a large number of receptors.After it is released by a neuron, 5-HT activates receptors located on nearby neurons.
Stability : The stability of ELISA kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. The loss rate was determined by accelerated thermal degradation test. Keep the kit at 37°C for 4 and 7 days, and compare O.D.values of the kit kept at 37°C with that of at recommended temperature. (referring from China Biological Products Standard, which was calc µLated by the Arrhenius equation. For ELISA kit, 4 days storage at 37°C can be considered as 6 months at 2 - 8°C, which means 7 days at 37°C equaling 12 months at 2 - 8°C).
0.01 0.01 USD
5 HT 4 Antibody
Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : HTR4
GeneID : 3360
Uniprot : Q13639
Specificity : 5-HT-4 Antibody detects endogenous levels of total 5-HT-4.
Immunogen : A syntheVolumed peptide derived from human 5-HT-4, corresponding to a region within C-terminal amino acids.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat
Prediction : Bovine,Sheep,Rabbit
Application : WB,IF/ICC,ELISA(peptide)
Dilution : WB 1 : 500-1 : 1000, IF/ICC 1 : 100-1 : 500, ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2835865
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : DF3503-BP
Des# Blocking Peptide : 5-HT-4 Blocking peptide
Blocking Peptide Price : $549 CAD
0.01 0.01 USD
5 HT antibody
Volume : 100 µg
Purification : Immunogen affinity purified
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Rabbit
Clonality : polyclonal Ab
Clone ID :
Isotype : IgG
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background :
Immunogen : 5-hydroxytryptamine
Aliases :
Observed MW :
Uniprot ID :
Reactivity :
Application : ELISA, IHC
Recommended dilution : IHC : 1 : 50-1 : 500
Gene ID :
Research Area :
0.01 0.01 USD
5 HETE(5 Hydroxyeicosatetraenoic Acid) ELISA Kit
Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 5-HETE
Alias : 5-HETE
Sensitivity : 0.094ng/ml
Range : 0.156-10ng/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area : Signal Transduction
0.01 0.01 USD
5 FAM antibody
Volume : 100 µg
Purification : Immunogen affinity purified
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Rabbit
Clonality : polyclonal Ab
Clone ID :
Isotype : IgG
Storage : PBS with 0.06% PC300 and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background :
Immunogen : KLH conj µgated 5-FAM
Aliases : 5-Carboxyfluorescein
Observed MW :
Uniprot ID :
Reactivity : FAM
Application : ELISA
Recommended dilution : 1 : 5000-1 : 10000
Gene ID :
Research Area :
0.01 0.01 USD
5 Lipoxygenase Antibody
Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : ALOX5
GeneID : 240
Uniprot : P09917
Specificity : 5 Lipoxygenase Antibody detects endogenous levels of total 5 Lipoxygenase.
Immunogen : A syntheVolumed peptide derived from human 5 Lipoxygenase, corresponding to a region within the internal amino acids.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat
Prediction : Pig,Bovine,Sheep,Rabbit,Dog
Application : WB,ELISA(peptide)
Dilution : WB 1 : 500-1 : 2000, ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2844704
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : AF4699-BP
Des# Blocking Peptide : 5 Lipoxygenase Blocking peptide
Blocking Peptide Price : $549 CAD
0.01 0.01 USD
4EBP1 antibody
Volume : 100 µg
Purification : Protein A+G purification
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Mouse
Clonality : monoclonal
Clone ID : 6C4
Isotype : IgG2b
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Eukaryotic translation initiation factor 4E-binding protein 1(4EBP1), is a member of 4EBPs family, which reg µLate the translation of a subset of mRNA by competing with eIF4G for binding to eIF4E, thus preventing the assembly of the eIF4F complex. The eIF4F facilitates the recruitment of other translation initiation factors to form the complex and then initiates cap-dependent translation.4EBP1 also mediates the reg µLation of protein translation by growth factors, hormones and other stim µLi that signal thro µgh the MAP kinase and mTORC1 pathways. There are three forms of 4EBP1 alpha, beta and gamma.
Immunogen : eukaryotic translation initiation factor 4E binding protein 1
Aliases : 4E BP1 4EBP1 BP 1 eIF4E binding protein 1 EIF4EBP1 PHAS I
Observed MW : 12 kDa
Uniprot ID : Q13541
Reactivity : Human
Application : ELISA, WB, IF
Recommended dilution : WB : 1 : 500-1 : 2000; IF : 1 : 20-1 : 200
Gene ID : 1978
Research Area : Cancer, Metabolism
0.01 0.01 USD
4EBP1 antibody
Volume : 100 µg
Purification : Protein A+G purification
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Mouse
Clonality : monoclonal
Clone ID : 6C4
Isotype : IgG2b
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Eukaryotic translation initiation factor 4E-binding protein 1(4EBP1), is a member of 4EBPs family, which reg µLate the translation of a subset of mRNA by competing with eIF4G for binding to eIF4E, thus preventing the assembly of the eIF4F complex. The eIF4F facilitates the recruitment of other translation initiation factors to form the complex and then initiates cap-dependent translation.4EBP1 also mediates the reg µLation of protein translation by growth factors, hormones and other stim µLi that signal thro µgh the MAP kinase and mTORC1 pathways. There are three forms of 4EBP1 alpha, beta and gamma.
Immunogen : eukaryotic translation initiation factor 4E binding protein 1
Aliases : 4E BP1 4EBP1 BP 1 eIF4E binding protein 1 EIF4EBP1 PHAS I
Observed MW : 12 kDa
Uniprot ID : Q13541
Reactivity : Human
Application : ELISA, WB, IF
Recommended dilution : WB : 1 : 500-1 : 2000; IF : 1 : 20-1 : 200
Gene ID : 1978
Research Area : Cancer, Metabolism
0.01 0.01 USD
4E BP1 Antibody
Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : EIF4EBP1
GeneID : 1978
Uniprot : Q13541
Specificity : 4E-BP1 Antibody detects endogenous levels of total 4E-BP1.
Immunogen : A syntheVolumed peptide derived from human 4E-BP1.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat
Prediction :
Application : ELISA(peptide)
Dilution : ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2847325
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : AF6601-BP
Des# Blocking Peptide : 4E-BP1 Blocking peptide
Blocking Peptide Price : $549 CAD
0.01 0.01 USD
48 well clear flat bottom ultra low attachment plates individually wrapped sterile skin packing
DETAILS
48-well
Polystyrene
µLtra-low attachment surface
Flat bottom with lid
RNase-/DNase-free, Nonpyrogenic
Sterile
1 PLATE/BAG 20 BAGS/CASE
0.01 0.01 USD
48 Well Cell Culture Plate Clear TC treated
30% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
50 Plates Per Quantity
Cell c µLture plates have five types of well number : 6-wells, 12-wells, 24-wells, 24-wells and 96-wells
Flat surface of bottom in uniformity maximizes growth area for each well
Special design of chamfers and raised rims on wells mated rings on inner surface of lid lessen cross contamination among wells
Stacking ring on the lid stabilize plates when stacking m µLti- layers for saving space in laboratory
Compared with traditional plate, special design of anti-skid area on side face is easy for grip
The arrays of numerical code greatly help to identify each well for various medium and purposes
Feature
USP Plastic Class VI Polystyrene
6-well, 12-well, 24-well and 96-well are available **Please inquire about the 12, 24 and 96-well plates.
Suspension c µLture and adherent c µLture for choices
Number codes are for easy identification
RNase-free, DNase-free
Non-pyrogenic, non-toxic
SAL level 10 -6
Packaging
Lot number is printed on packaging for tracking
Plastic/paper packaging is easy to open
Cartons are customized for protecting products
0.01 0.01 USD
4 Way Centrifuge Tube Rack
This 4-way test tube rack is m µLtifunctional
Suitable for 0.5 ml, 1.5 ml, 2.0 ml, 5.0 ml, 10 ml, 15 ml, 50 ml centrif µge tubes
Pack of 5 or 10 units available for purchase
Dimensions : 17 x 14.9 x 8.9 cm
Polypropylene material
0.01 0.01 USD
4 Strip PCR Tubes and Caps for Corbett Rotor Gene™
Tubes and caps are in strips of four and are in separate bags for ease of handling and labeling.
Specifications
Sterility
Non-sterile
Cap Type
Snap and Lock Pl µg Seal Flat Cap
Color
Clear
Volume (Metric)
0.1mL
Closure Material
Polypropylene
For Use With (Equipment)
Corbett™ Rotor-Gene™ system
Capacity (Metric)
0.1mL
Type
4-Strip PCR Tube And Flat Cap
Certifications/Compliance
RNase, DNase and pyrogen free
Material
Polypropylene
Format
Strip of 4 tubes
Shape
Conical
0.01 0.01 USD
4 HNE(4 Hydroxynonenal) ELISA Kit
Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 4-HNE
Alias : 4-HNE
Sensitivity : 18.75pg/ml
Range : 31.25-2000pg/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area : Signal Transduction
0.01 0.01 USD
4 1BB/CD137/TNFRSF9/ILA
Volume : 20 µg
Protein Type : Target proteins
Product Grade : For Research Use.
Tag : C-Avi-6His
Species : Human
Expressed In : Human Cells
Note : Usually in stock. Smaller quantities and volume discounts are available. For further information, please contact us.
0.01 0.01 USD
4 1BB/CD137/TNFRSF9
Volume : 50 µg
Protein Type : Target proteins
Product Grade : For Research Use.
Tag : C-mFc
Species : Human
Expressed In : Human Cells
Note : Usually in stock. Smaller quantities and volume discounts are available. For further information, please contact us.
0.01 0.01 USD
4 1BB Ligand/4 1BBL/CD137L/TNFSF9
Volume : 50 µg
Protein Type : Target proteins
Product Grade : For Research Use.
Tag : N-6His-Flag
Species : Human
Expressed In : Human cells
Note : Usually in stock. Smaller quantities and volume discounts are available. For further information, please contact us.
0.01 0.01 USD
3C like Proteinase/3CLPro
Volume : 50 µg
Protein Type : Target proteins
Product Grade : For Research Use.
Tag : N-6His
Species : 2019-nCoV
Expressed In : E.coli
Note : Usually in stock. Smaller quantities and volume discounts are available. For further information, please contact us.
0.01 0.01 USD
3:1 Agarose
3 : 1 Agarose is a molec µLar biology grade, standard melting point, unique mixture of agarose form µLated to provide high resolution of small nucleic acids and PCR products ≤1000 bp tho µgh, it is capable of resolving DNA species up to 1500 bp in Volume . Its optimized gel strength res µLts in easy-to-handle gels, enhancing the convenience of gel processing and blotting. Designed for analytical electrophoresis. For easy recovery of DNA bands, we recommend the LM Agarose.
3 : 1 Agarose Gel Preparation Protocol
1. To make gels with agarose concentration less than 2% :
(1) Use a flask that is 2 to 4 times the volume of the solution being prepared.
(2) Add the correct amount of dry agarose to a measured quantity of electrophoresis buffer.
(3) If use a boiling water bath:
‧To melt the agarose, simply by heating the slurry in a boiling water bath, bring the solution to a boil and allow it to boil for 5-10 minutes stirring continuously, until the agarose dissolves completely.
If use a microwave oven:
‧To melt the agarose in solutions of less than 2%, heat the slurry in microwave oven on high power setting until it starts to boil.
‧Allow the solution to boil for 1 min or until the solution is clear and all particles are dissolved.
‧Remove the flask from the microwave oven, and gently swirl to mix the agarose solution. Use caution when handling as solution may be extremely heated.
(4) Cool the solution to approx. 60°C before pouring.
2.To make gels with agarose concentration greater than 2% :
(1) Use a flask that is 2 to 4 times the volume of the solution being prepared.
(2) Add the correct amount of dry agarose to a measured quantity of electrophoresis buffer.
(3) Heat the slurry in a microwave oven on a medium power setting until it starts to boil.
(4) Remove the flask from the oven and gently swirl to resuspend the gel particles.
(5) Reheat the solution on a medium power setting until it starts to boil again.
(6) Afterwards, remove the flask from the microwave and gently swirl. If the agarose did not completely dissolve, reheat the solution again.
(7) Cool to approx. 70°C before pouring.
Guideline on separation of DNA in agarose
Volume range (bp)
500 ─ 1000
100 ─ 500
10 ─ 100
Agarose in gel (%) 1 ╳ TAE Buffer
3.0
4.0
6.0
Agarose in gel (%) 1 ╳ TBE Buffer
2.0
3.0
5.0
0.01 0.01 USD